PLANT FOR DECANTATION AND RECYCLING OF WASTE WATER AND FOR MUD DEHYDRATION Mod. FB/2000V-WD
Max. treatment capacity up to 500 l/min of waste water
WASTE WATER PUMP
Submersed pump.
Equipped with:
delivery pipe attachment;
rubber hosing;
connection cable for the start up.
AUTOMATIC FLOCCULANT STATION
Container
"Open air" container for mixing the flocculant, built in steel plate.
Equipped with:
attachment support for electric mixer;
steel section supports, complete with anchorages.
Helical electric mixer
Low speed mixer, designed for maximum utilization of separation properties of flocculant.
Power : kW 0.37
Speed : r.p.m. 70
Mixing shaft diameter : mm 30
Flocculant dosing pump
Nr. 1 piston motor-driven pump type FB 100 DL for batching with adequate delivery to the plant, for programming according to specific requirements.
Power : kW 0.37
Flow rate : l/h 0100
Maximum pressure : Bar 8
Equipped with:
gearbox body in aluminium;
head body in PVC;
ARNITE piston (diam. 70 mm);
flocculant delivery hose in wired rubber (max. pressure 10 bar, diam. 1/2");
bronze non return valve.
WASTE WATER DECANTATION UNIT
Static decanter
Decanter built in steel plate.
Diameter : mm 2.000
Cross section : mm 2.200 x 2.200
Overall height dimensions : mm 5.100
Equipped with:
flanged overflow channel for recovery of decanted water;
central pipeline for inlet of turbid water into distribution cone;
internal pressure-off cone to facilitate sedimentation of solids contained in the water;
distribution cone support beam built in section steel;
steel delivery pipe, including flanges and curves;
manual valve type FB 50 for regulating the waste water flow, fitted internally with anti-abrasive rubber sleeve;
steel collection pipe for treated water, including flanges and curves.
Internal decanter treatment
The decanter is internally lined with a corrosion proof, anti-abrasive and stick-proof lining. This lining protects the metal from incrustations and allows easy detaching of the sludge from the walls, in order to prevent system clogging.
AUTOMATIC MUD DISCHARGE
Equipped with:
manual valve FB 100 M;
pneumatic valve FB 100 P complete with rubber anti-abrasive sleeve;
solenoid exhaust valve for pneumatic cylinder pressure;
flange (diam. 100 mm) with rubber support for piping connection;
probe group for automatic pump operation and automatic decanter discharge
CLEAN WATER RESERVOIR
Steel container for decanted water (capacity 5,000 l) incorporated in the decanter structure
FILTERPRESS, Mod. FB/300-5 (Treatment capacity 0,011 m3 /cycle of dry mud)
Filterpress structure
Structure in electro-welded composite steel, specially processed to guarantee perfect machine operation.
Sliding filter plate supported by 2 wheels with PVC bushing, which slide on the head tie rods, and 2 contrast wheels.
Hydraulic power unit
Hydraulic power unit for feeding the cylinder. Hydraulic cylinder for opening and closing plates, equipped with sealing rings type Polipac.
Plates
Nr. 5 polypropylene plates sliding on PVC plates and dragged by chains.
Plate size : mm 300 x 300
Automatic system for dragging the plates and opening the chambers, with external support in hardened steel for shaking and discharging the mud panels.
Set of filter clothes and under clothes.
Drainage tubes from the two lower side angles of the plates for conveying filtered water to the collection channel.
Filtered water collection channels with flow regulator, complete with consenting probes which determine the end of the filtering process.
Shaker for the plates
Square-section shafts (mm 40x40), each one supported externally by nr. 1 support mounted on bearings.
Equipped with:
hardened cams for shaking inserted on the shaft;
nr. 1 central supports with PVC bushing;
reduction gear unit (power kW 0.18) with self-arresting motor;
adjustable disc for locking into the proper position
Anti splash hood
Anti-splash hood built in pressed plate and fitted onto the filter press structure.
Mud feeding system to the filterpress
Steel container for sludge collection, complete with probe fittings.
Equipped with:
probe group for functioning of the filterpress;
reinforced rubber hose (max. pressure 10 atm).
High pressure feeding membrane pump.
Features:
Max. flow rate : l/min 100
Max. pressure : atm 7
ELECTRIC PANEL BOARD
Electric panel board manufactured in painted steel plate with door locked by a main switch, according to current safety norms.
Equipped with:
remote controls for every use;
PLC
Colour of the machinery: GREY RAL 7044 + RED RAL 3000
VOLTAGE: 400 V - 50 Hz
