FRACCAROLI & BALZAN WASTE WATER FILTRATION PLANT - ROUND MODEL - FB/2300V-WDC

PLANT FOR DECANTATION AND RECYCLING OF WASTE WATER AND FOR MUD DEHYDRATION Mod. FB/2300V-WD

Max. treatment capacity 750 l/min of waste water

FB2300V-WD + filterpress + clean water tank 1.jpg

WASTE WATER PUMP

Submersed pump.
Equipped with:

  • delivery pipe attachment;

  • rubber hosing;

  • connection cable for the start up.

image--004.jpg

AUTOMATIC FLOCCULANT STATION

Container
"Open air" container for mixing the flocculant, built in steel plate.
Equipped with:

  • attachment support for electric mixer;

  • steel section supports, complete with anchorages.

Helical electric mixer
Low speed mixer, designed for maximum utilization of separation properties of flocculant.
Power : kW 0.37
Speed : r.p.m. 70
Mixing shaft diameter : mm 30

image--005.jpg

Flocculant dosing pump
Nr. 1 piston motor-driven pump type FB 100 DL for batching with adequate delivery to the plant, for programming according to specific requirements.
Power : kW 0.37
Flow rate : l/h 0 100
Maximum pressure : Bar 8

Equipped with:

  • gearbox body in aluminium;

  • head body in PVC;

  • ARNITE piston (diam. 70 mm);

  • flocculant delivery hose in wired rubber (max. pressure 10 bar, diam. 1/2");

  • bronze non return valve.

image--008.jpg

WASTE WATER DECANTATION UNIT

Static decanter
Decanter built in steel plate.

Features

  • Diameter : mm 2.300

  • Overall height dimensions : mm 6.250

    Equipped with:

  • flanged overflow channel for recovery of decanted water;

  • central pipeline for inlet of turbid water into distribution cone;

  • internal pressure-off cone to facilitate sedimentation of solids contained in the water;

  • distribution cone support beam built in section steel;

  • steel delivery pipe, including flanges and curves;

  • manual valve type FB 50 for regulating the waste water flow, fitted internally with anti-abrasive rubber sleeve;

  • steel collection pipe for treated water, including flanges and curves.

    Internal decanter treatment
    The decanter is internally lined with a corrosion proof, anti-abrasive and stick-proof lining. This lining protects the metal from incrustations and allows easy detaching of the sludge from the walls, in order to prevent system clogging.

AUTOMATIC MUD DISCHARGE

Equipped with:

  • manual valve FB 100 M;

  • pneumatic valve FB 100 P complete with rubber anti-abrasive sleeve;

  • solenoid exhaust valve for pneumatic cylinder pressure;

  • flange (diam. 100 mm) with rubber support for piping connection;

  • probe group for automatic pump operation and automatic decanter discharge

image--007.jpg
image--010.jpg

FILTERPRESS, Mod. FB/400-6 (Treatment capacity 0,020 m3 /cycle of dry mud)

Filterpress structure
Structure in electro-welded composite steel, specially processed to guarantee perfect machine operation.
Sliding filter plate supported by 2 wheels with PVC bushing, which slide on the head tie rods, and 2 contrast wheels.

Hydraulic power unit
Hydraulic power unit for feeding the cylinder. Hydraulic cylinder for opening and closing plates, equipped with sealing rings type Polipac.

image--012.jpg

Plates
Nr. 6 polypropylene plates sliding on PVC plates and dragged by chains.
Plate size mm 400 x 400
Automatic system for dragging the plates and opening the chambers, with external support in hardened steel for shaking and discharging the mud panels.
Set of filter clothes and under clothes.
Drainage tubes from the two lower side angles of the plates for conveying filtered water to the collection channel.
Filtered water collection channels with flow regulator, complete with consenting probes which determine the end of the filtering process.

Shaker for the plates
Square-section shafts (mm 40x40), each one supported externally by nr. 1 support mounted on bearings.
Equipped with:

  • hardened cams for shaking inserted on the shaft;

  • nr. 1 central supports with PVC bushing;

  • reduction gear unit (power kW 0.18) with self-arresting motor;

  • adjustable disc for locking into the proper position

image--011.jpg

Anti splash hood
Anti-splash hood built in pressed plate and fitted onto the filter press structure.

image--014.jpg

Mud feeding system to the filterpress
Steel container for sludge collection, complete with probe fittings.
Equipped with:

  • probe group for functioning of the filterpress;

  • reinforced rubber hose (max. pressure 10 atm).

  • High pressure feeding membrane pump.
    Features:
    Max. flow rate : l/min 100
    Max. pressure : atm 7

image--015.jpg

ELECTRIC PANEL BOARD

Electric panel board manufactured in painted steel plate with door locked by a main switch, according to current safety norms.
Equipped with:

  • remote controls for every use;

  • PLC

Colour of the machinery: GREY RAL 7044 + RED RAL 3000
VOLTAGE: 400 V - 50 Hz